|
Who's Online
There currently are 5973 guests online.
|
Categories
|
Information
|
Featured Product
|
|
|
|
|
There are currently no product reviews.
;
Awesome manual. Complete diagrams of all board assemblies as well as how to get to each part of the t.v. down to the individual screws and their locations. Get it.
;
perfect copy, im very satisfied, i was need the diagram over the powersupply and
the copy was very sharp
;
This is exactly the service manual I needed.
Complete with all schematics, partslists, PCB layouts and alignment instructions.
This manual covers both the T-4970 en T-488F Onkyo tuner.
;
IF PRINTED CIRQUIT BOARD WIRING VIEW WAS ONE TONE LIGHTER, THEN 5 STAR RANK HAS TO BE MY CHOISE.
;
Very usefull, good quality drawings !
Muito útil encontrei todas as informações necessárias.
5.18
PIN-code, English
PIN-code deactivated by customer prior to service With the PIN-code deactivated prior to service you must be aware of the modules will be registered to the product in the following situations : - the product has been connected to the mains for more than 12 hours, including Standby time. - the PIN-code is activated or deactivated. The registration of modules in the product can only be changed at Bang & Olufsen, Struer. Activate the PIN-code Select the TV SETUP menu. Press l twice and then STOP to bring up the PINCODE SETUP menu. Enter the 4 digit Pin-code. Re-enter the code to confirm it and press GO. If you want to change or delete the PIN-code, enter the correct PIN-code and press GO. It is now possible to change the PIN-code or delete the PIN-code. Enter the PIN-code If the PIN-code is activated and the TV is disconnected from the mains for more than15-30 minutes, a PINCODE menu appears as soon as the TV is switched on. Enter the PIN-code, and the TV starts again. If the PIN-code has been forgotten If the PIN-code has been forgotten (5 tries within 3 hours with the mains connected), the only way to unlock the TV again is by entering a 5 digit Master-code. The Master-code is ordered by sending a request either via the Retail System or on the Master-code formula. If non of these options are available please contact Bang & Olufsen. When the TV prompts for a PIN-code, press and hold l down to bring up the MASTERCODE menu. Enter the Master-code and press GO. This will deactivate the PIN-code and reactivate the TV.
|
|
|
> |
|